Switch User Manual

area virtual-link dead-interval
25-18 OSPFv3 Configuration
Defaults
None.
Mode
RouterOSPFv3configuration:C3(su)‐>router(Config‐router)#
Usage
ThevirtuallinkneighborisidentifiedbyitsrouterID.Usethenoformofthiscommandtodelete
theconfiguredOSPFv3virtualinterfaceidentifiedbyareaandneighbor.
Example
Thisexamplecreatesavirtualinterfaceforarea20andtheneighborwithrouterID2.2.2.2.
C3(su)->router(Config-router)# area 20 virtual-link 2.2.2.2
area virtual-link dead-interval
ThiscommandconfiguresthedeadintervalforthespecifiedOSPFv3virtualinterface.
Syntax
area areaid virtual-link neighborid dead-interval seconds
no area areaid virtual-link neighborid dead-interval
Parameters
Defaults
Thedefaultdeadintervalis40seconds.
Mode
RouterOSPFv3configuration:C3(su)‐>router(Config‐router)#
Usage
Usethenoformofthiscommandtoreturnaconfiguredvaluetothedefaultof40seconds.
Example
Thisexampleconfiguresadeadintervalof60secondsforthespecifiedvirtualinterface.
C3(su)->router(Config-router)# area 20 virtual-link 2.2.2.2 dead-interval 60
areaid SpecifiestheareaIDinIPaddressformat(dotted‐quad)orasadecimal
value.
neighborid SpecifiesthevirtuallinkneighborbymeansofitsrouterID.Therouter
IDmustbeenteredin32‐bitdotted‐quadnotation.
seconds Specifiesthevalueofthedeadintervalinseconds.Therangeis
from1
to65535seconds.