Switch User Manual

area stub no-summary
SecureStack C3 Configuration Guide 25-17
Example
ThisexamplecreatesastubareawiththeIDof30.
C3(su)->router(Config-router)# area 30 stub
area stub no-summary
ThiscommanddisablestheimportofsummaryLSAsintothespecifiedstubarea.
Syntax
area areaid stub no-summary
no area areaid stub no-summary
Parameters
Defaults
None.
Mode
RouterOSPFv3configuration:C3(su)‐>router(Config‐router)#
Usage
UsethenoformofthiscommandtosetthesummaryLSAimportmodetothedefaultforthe
specifiedstubarea.
Example
TheexampledisablestheimportofsummaryLSAsintostubarea30.
C3(su)->router(Config-router)# area 30 stub no-summary
area virtual-link
ThiscommandcreatestheOSPFv3virtualinterfac eforthespecifiedareaandneighbor.
Syntax
area areaid virtual-link neighborid
no area areaid virtual-link neighborid
Parameters
areaid SpecifiestheareaIDinIPaddressformat(dotted‐quad)orasadecimal
value.
areaid SpecifiestheareaIDinIPaddressformat(dotted‐quad)orasadecimal
value.
neighborid SpecifiesthevirtuallinkneighborbymeansofitsrouterID.Therouter
IDmustbeenteredin32‐bitdotted‐quadnotation.