Switch User Manual

ipv6 dhcp pool
SecureStack C3 Configuration Guide 24-5
Usage
DHCPv6poolsareusedtospecifyinformationfortheDHCPv6servertodistributetoDHCPv6 
clients.ThesepoolsaresharedbetweenmultipleinterfacesoverwhichDHCPv6server
capabilitiesareconfigured.
Afterexecutingthiscommandandenteringpoolconfigurationmode,youcanreturntoglobal
configurationmodebyexecutingtheexitcommand.
Poolconfiguration commandsaredescribed
inthesection“AddressPoolConfigurationCommands”onpage 24‐6.
Usethenoformofthiscommandtoremoveaspecif iedpool.
Example
ThisexampleentersDHCPpoolconfigurationmodetoconfigurethepoolnamed“PoolA.”
C3(su)->router(Config)# ipv6 dhcp pool PoolA
C3(su)->router(Config-dhcp6s-pool)#