Switch User Manual

show ipv6 route preferences
SecureStack C3 Configuration Guide 22-27
show ipv6 route preferences
Thiscommandshowsthepreferencevalueassociatedwiththetypeofroute.
Syntax
show ipv6 route preference
Parameters
None.
Defaults
None.
Mode
Routerprivilegedexecution:C3(su)‐>router#
Routeruserexecution:C3(su)‐>router>
Usage
Lowernumbershaveagreaterpreference.Aroutewithapreferenceof255cannotbeusedto
forwardtraffic.
Thedefaultpreferencevalueforstaticroutescanbesetwiththeipv6routedistancecommand.
Thedistanceforaspecificstaticroutecanbesetwiththeipv6routecommand.
Example
Thefollowingexampleshowstheoutputofthiscommand.
C3(su)->router#show ipv6 route preferences
Local 0
Static 1
OSPF Intra 8
OSPF Inter 10
OSPF Ext T1 13
OSPF Ext T2 150
OSPF NSSA T1 14
OSPF NSSA T2 151
Table 22‐3providesanexplanationofthecommandoutput.
Note: The configuration of NSSA preferences is not supported in this release.
Table 22-3 show ipv6 route preferences Output Details
Output Field What It Displays...
Local Preference of directly-connected routes.
Static Preference of static routes.
OSPF Intra Preference of routes within the OSPF area.
OSPF Inter Preference of routes to other OSPF routes that are outside of the
area.
OSPF Ext T1 Preference of OSPF Type-1 external routes.