Switch User Manual

show ipv6 route
22-26 IPv6 Configuration
Defaults
Ifnoparametersareentered,informationaboutallactiveIPv6routesisdisplayed.
Mode
Routerprivilegedexecution:C3(su)‐>router#
Routeruserexecution:C3(su)‐>router>
Usage
UsethiscommandtodisplayIPv6routingtableinformationforactiveroutes.
Example
ThisexampledisplaysallactiveIPv6routes.
C3(su)->router>show ipv6 route
IPv6 Routing Table - 5 entries
Codes: C - connected, S - static
O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF Ext 1, OE2 - OSPF Ext 2
ON1 - OSPF NSSA Ext Type 1, ON2 - OSPF NSSA Ext Type 2
S ::/0 [1/0]
via FE80::2D0:B7FF:FE2C:7694, Vlan 6
C 3FFE:501:FFFF:100::/64 [0/0]
via ::, Vlan 6
C 3FFE:501:FFFF:101::/64 [0/0]
via ::, Vlan 7
C 3FFE:501:FFFF:108::/64 [0/0]
via ::, Vlan 6
S 3FFE:501:FFFF:109::/64 [1/0]
via 3FFE:501:FFFF:100:200:FF:FE00:A1A1, Vlan 6
via FE80::200:FF:FE00:A1A1, Vlan 6
Table 22‐2providesanexplanationofthecommandoutput.
Table 22-2 show ipv6 route Output Details
Output Field What It Displays...
Codes: Key for the routing protocol codes that might appear in the Codes
column of the routing table output.
Codes column The code for the routing protocol that created this routing entry.
IPv6 prefix/prefix-length The IPv6 prefix and prefix length of the destination IPv6 network
corresponding to this route.
[ Preference / Metric ] The administrative distance (preference) and cost (metric)
associated with this route.
Tag The decimal value of the tag associated with a redistributed route,
if it is not 0.
via Next-hop The outgoing router IPv6 address to use when forwarding traffic to
the next router, if any, in the path toward the destination.
Interface The outgoing router interface to use when forwarding traffic to the
next destination.