Switch User Manual

Query Commands
22-22 IPv6 Configuration
Query Commands
show ipv6
ThiscommanddisplaysthestatusofIPv6forwardingmodeandunicastroutingmode.
Syntax
show ipv6
Parameters
None.
Defaults
None.
Mode
Routerprivilegedexecution:C3(su)‐>router#
Usage
TheoutputofthiscommanddisplayswhetherIPv6forwardingmodeandunicastroutingmode
areenabledordisabled.
Example
ThisexampledisplaysinformationaboutIPv6modes.
C3(su)‐>router# show ipv6
IPv6 Forwarding Mode Enabled
IPv6 Unicast Routing Mode Enabled
show ipv6 interface
ThiscommanddisplaysinformationaboutoneorallconfiguredIPv6interfaces.
Syntax
show ipv6 interface [vlan vlan-id | tunnel tunnel-id | loopback loop-id]
For information about... Refer to page...
show ipv6 22-22
show ipv6 interface 22-22
show ipv6 neighbors 22-24
show ipv6 route 22-25
show ipv6 route preferences 22-27
show ipv6 route summary 22-28
show ipv6 traffic 22-29
clear ipv6 statistics 22-34