Switch User Manual

ipv6 nd ra-interval
22-18 IPv6 Configuration
ipv6 nd ra-interval
Thiscommandsetsthetransmissionintervalbetweenrouteradvertisements.
Syntax
ipv6 nd ra-interval sec
no ipv6 nd ra-interval
Parameters
Defaults
600seconds.
Mode
Routerinterfaceconfiguration:C3(su)‐>router(Config‐if(Vlan1))#
Usage
Thenoformofthiscommandresetstheintervalvaluetothedefaultof600seconds.
Example
Thisexamplesetstherouteradvertisementtransmissionintervalto120seconds.
C3(su)->router(Config-if(Vlan 1))# ipv6 nd ra-interval 120
ipv6 nd ra-lifetime
Thiscommandsetsthevalue,inseconds,thatisplacedintheRouterLifetimefieldofrouter
advertisementssentfromthisinterface.
Syntax
ipv6 nd ra-lifetime sec | 0
no ipv6 nd ra-lifetime
Parameters
Defaults
1800seconds.
Mode
Routerinterfaceconfiguration:C3(su)‐>router(Config‐if(Vlan1))#
sec Specifiesthevalueinsecondsoftherouteradvertisementtransmission
interval.Thevaluecanrangefrom4to1800seconds.
sec SpecifiesthevalueoftheRouterLifetimeinseconds.Thevaluemustbe
0,oranintegerbetweenthevalueoftherouteradvertisementinterval
and9000seconds.
Avalueof0meansthatthisrouterisnottobeusedasthedefaultrouter.