Switch User Manual

ip dvmrp
20-34 IPv4 Routing Protocol Configuration
ip dvmrp
UsethiscommandtoenabletheDVMRPprocess.Thenoformofthiscommanddisablesthe
DVMRPprocess:
Syntax
ip dvmrp
no ip dvmrp
Parameters
None.
Defaults
None.
Mode
Globalconfiguration:C3(su)‐>router(Config)#
Example
ThisexampleshowshowtoenabletheDVMRPprocess:
C3(su)->router(Config)#ip dvmrp
ip dvmrp enable
UsethiscommandtoenableDVMRPonaninterface.Thenoformofthiscommanddisables
DVMRPonaninterface:
Syntax
ip dvmrp enable
no ip dvmrp enable
Parameters
None.
Defaults
None.
Table 20-1 Commands to Enable DVMRP on an Interface
To do this... Use these commands...
Globally enable IGMP. “ip igmp” on page 13-10
Globally enable DVMRP. “ip dvmrp” on page 20-34.
Enable IGMP on each interface. “ip igmp enable” on page 13-11
Enable DVMRP on each interface . “ip dvmrp enable” on page 20-34