Switch User Manual

redistribute
20-10 IPv4 Routing Protocol Configuration
Mode
Routerconfiguration:C3(su)‐>router(Config‐router)#
Defaults
Ifmetricvalueisnotspecified,1willbeapplied.
Ifsubnetsisnotspecified,onlynon‐subnettedrouteswillberedistributed.
Example
Thisexampleshowshowtoredistributeroutinginformationdiscoveredthroughstaticrouteswill
beredistributedintoRIPupdatemessages:
C3(su)->router(Config)#router rip
C3(su)->router(Config-router)#redistribute static
static Specifiesthatnon‐RIProutinginformationdiscoveredviastaticrouteswill
beredistributed.Staticroutesarethosecreatedusingtheiproute
commanddetailedin“iproute”onpage19‐21.
metricmetricvalue (Optional)Specifiesametricfortheconnected,OSPForstatic
redistributionroute.Thisvalueshouldbe
consistentwiththedesignation
protocol.
subnets (Optional)Specifiesthatconnected,OSPForstaticroutesthatare
subnettedwillberedistributed.