Switch User Manual

no ip routing
SecureStack C3 Configuration Guide 19-7
Mode
Interfaceconfiguration:C3(su)‐>router(Config‐if(Vlan1))#
Usage
TheshutdownformofthiscommanddisablesaninterfaceforIProuting.
Example
ThisexampleshowshowtoenableVLAN1forIProuting:
C3(su)->router(Config)#interface vlan 1
C3(su)->router(Config-if(Vlan 1))#no shutdown
no ip routing
UsethiscommandtodisableIProutingonthedevice.Bydefault,IProutingisenabledwhen
interfacesareconfiguredforitasdescribedin“ConfiguringRouting InterfaceSettings”on
page 19‐1.
Syntax
no ip routing
Parameters
None.
Mode
Globalconfiguration:C3(su)‐>router(Config)#
Defaults
None.
Example
This example shows how to disable IP routing on the device:
C3(su)->router(Config)#no ip routing