Switch User Manual

clear logging interface
SecureStack C3 Configuration Guide 14-13
C3(rw)->router(Config)#exit
C3(rw)->router#exit
C3(rw)->router>exit
C3(rw)->set logging interface vlan 100
C3(rw)->show logging interface
vlan 100 192.168.10.1
clear logging interface
UsethiscommandtocleartheinterfaceusedforthesourceIPaddressofthesystemloggingback
tothedefaultoftheHostinterface.
Syntax
clear logging interface
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThiscommandreturnstheinterfaceusedforthesourceIPaddressofthesystemloggingbackto
thedefaultoftheHostinterface.
C3(rw)->show logging interface
vlan 100 192.168.10.1
C3(rw)->clear logging interface
C3(rw)->