Switch User Manual

show logging buffer
SecureStack C3 Configuration Guide 14-11
Example
Thisexampleshowshowtoclearloca llogging:
C3(su)->clear logging local
show logging buffer
Usethiscommandtodisplaythelast256messageslogged.Bydefault,criticalfailuresanduser
loginandlogoutti mestampsaredisplayed.
Syntax
show logging buffer
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowsaportionoftheinformationdisplayedwiththeshowloggingbuffer
command:
C3(su)->show logging buffer
<165>Sep 4 07:43:09 10.42.71.13 CLI[5]User:rw logged in from 10.2.1.122 (telnet)
<165>Sep 4 07:43:24 10.42.71.13 CLI[5]User: debug failed login from 10.4.1.100
(telnet)
show logging interface
Usethiscommandtodisplaytheint erfaceusedforthesourceIPaddressofthesystemlogging.
Syntax
show logging interface
Parameters
None.
Defaults
None.
Mode
Switchmode,read‐only.