Switch User Manual

SecureStack C3 Configuration Guide 14-1
14
Logging and Network Management
Thischapterdescribesswitch‐relatedloggingandnetworkmanagementcommandsandhowto
usethem.
Configuring System Logging
Purpose
Todisplayandconfiguresystemlogging,includingSyslogserversettings,Syslogdefaultsettings,
andtheloggingbuffer.
Commands
Note: The commands in this chapter pertain to network management of the SecureStack C3
device from the switch CLI only. For information on router-related network management tasks,
including reviewing router ARP tables and IP traffic, refer to Chapter 19.
For information about... Refer to page...
Configuring System Logging 14-1
Monitoring Network Events and Status 14-14
Managing Switch Network Addresses and Routes 14-19
Configuring Simple Network Time Protocol (SNTP) 14-29
Configuring Node Aliases 14-40
Note: An Enterasys Networks Feature Guide document containing an in-depth discussion of Syslog
configuration is located on the Enterasys Networks web site:
http://www.enterasys.com/support/manuals/
For information about... Refer to page...
show logging server 14-2
set logging server 14-3
clear logging server 14-4
show logging default 14-4
set logging default 14-5