Switch User Manual

clear port txq
SecureStack C3 Configuration Guide 12-9
clear port txq
Usethiscommandtoclearporttransmitqueuevaluesbacktotheirdefaultvalues.
Syntax
clear port txq port-string
Parameters
Defaults
Bydefault,transmitqueuesaredefinedasfollows:
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtocleartransmitqueuevaluesonge.1.1:
C3(su)->clear port txq ge.1.1
port‐string Clearstransmitqueuevaluesonspecificport(s)backtotheirdefault
values.Foradetaileddescriptionofpossibleport‐stringvalues,referto
“PortStringSyntaxUsedintheCLI”onpage 7‐1.
Onlyphysicalportscanbeconfiguredwiththiscommand.LAGports
cannotbeconfigured.
Queue Mode Weight Queue Mode Weight
0WRR14WRR5
1WRR25WRR6
2WRR36WRR7
3WRR47WRR8