Switch User Manual

set cos state
11-20 Policy Classification Configuration
Commands
set cos state
UsethiscommandtoenableordisableClassofService.
Syntax
set cos state {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
For information about... Refer to page...
set cos state 11-20
show cos state 11-21
clear cos state 11-21
set cos settings 11-22
clear cos settings 11-23
show cos settings 11-23
set cos port-config 11-24
show cos port-config 11-25
clear cos port-config 11-26
set cos port-resource irl 11-27
set cos port-resource flood-ctrl 11-28
show cos port-resource 11-29
clear cos port-resource irl 11-30
clear cos port-resource flood-ctrl 11-31
set cos reference 11-31
show cos reference 11-32
clear cos reference 11-33
show cos unit 11-34
clear cos all-entries 11-35
show cos port-type 11-35
enable|disable EnablesordisablesClassofServiceontheswitch.Defaultstateis
disabled.