Switch User Manual

SecureStack C3 Configuration Guide 11-1

Policy Classification Configuration

ThischapterdescribesthePolicyClassificationsetofcommandsandhowtousethem.

Policy Classification Configuration Summary

SecureStackC3devicessupportpolicyprofile‐basedprovisioningofnetworkresourcesby

allowingITadministratorsto:

•Create,changeorremovepolicyprofilesbasedonbusiness‐specificuseofnetworkservices.

•Permitordenyaccesstospecificservicesbycreatingandassigningclassificationruleswhich

mapuserprofilestoprotocol‐basedframefiltering

policiesconfiguredforaparticularVLAN

orClassofService(CoS).

• Assignorunassignportstopolicyprofilessothatonlyportsactivatedforaprofilewillbe

allowedtotransmitframesaccordingly.

For information about... Refer to page...

Policy Classification Configuration Summary 11-1

Configuring Policy Profiles 11-2

Configuring Classification Rules 11-6

Assigning Ports to Policy Profiles 11-15

Configuring Policy Class of Service (CoS) 11-17

Note: An Enterasys Networks Feature Guide document containing an in-depth discussion of Policy

configuration is located on the Enterasys Networks web site:

http://www.enterasys.com/support/manuals/

Note: It is recommended that you use Enterasys Networks NMS Policy Manager as an alternative

to CLI for configuring policy classification on the SecureStack C3 devices.