Switch User Manual

clear spantree portadmin
SecureStack C3 Configuration Guide 9-35
Example
ThisexampleshowshowtodisableSpanningTreeonge.1.5:
C3(rw)->set spantree portadmin ge.1.5 disable
clear spantree portadmin
UsethiscommandtoresetthedefaultSpanningTreeadminstatustoenableononeormoreports.
Syntax
clear spantree portadmin port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresetthedefaultSpanningTreeadminstatetoenableonge.1.12:
C3(rw)->clear spantree portadmin ge.1.12
show spantree portadmin
UsethiscommandtodisplaythestatusoftheSpanningTreealgorit hm ononeormoreports.
Syntax
show spantree portadmin [port port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,statuswillbedisplayedforallports.
Mode
Switchcommand,read‐only.
port‐string Resetsthedefaultadminstatusonspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 7‐1.
portport‐string (Optional)Displaysstatusforspecificport(s).Foradetaileddescriptionof
possibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”
onpage 7‐1.