Switch User Manual

show spantree vlanlist

SecureStack C3 Configuration Guide 9-15

Example

ThisexampleshowshowtomapFID2backtoSID0:

C3(su)->clear spantree mstmap 2

show spantree vlanlist

UsethiscommandtodisplaytheSpanningTreeID(s)assignedtooneormoreVLANs.

Syntax

show spantree vlanlist [vlan-list]

Parameters

Defaults

Ifnotspecified,SIDassignmentwillbedisplayedforallVLANs.

Mode

Switchcommand,read‐only.

Example

ThisexampleshowshowtodisplaytheSIDsmappedtoVLAN1.Inthiscase,SIDs2,16and42

aremappedtoVLAN1.Forthisinformationtodisplay,theSIDinstancemustbecreated usingthe

setspantreemsticommandasdescribedin“setspantreemsti”onpage 9

‐12,andtheFIDsmust

bemappedtoSID 1usingthesetspantreemstmapcommandasdescribedin“setspantree

mstmap”onpage 9‐14:

C3(su)->show spantree vlanlist 1

The following SIDS are assigned to VLAN 1: 2 16 42

show spantree mstcfgid

UsethiscommandtodisplaytheMSTconfigurationidentifierelements,includingformatselector,

configurationname,revisionlevel,andconfigurationdigest.