Switch User Manual

clear snmp interface
SecureStack C3 Configuration Guide 8-41
Example
ThisexampleconfiguresanIPaddressonVLANinterface100andthensetsthatinterfaceasthe
SNMPagentsourceIPaddress.
C3(rw)->router(Config-if(Vlan 100))#ip address 192.168.10.1 255.255.255.0
C3(rw)->router(Config-if(Vlan 100))#exit
C3(rw)->router(Config)#exit
C3(rw)->router#exit
C3(rw)->router>exit
C3(rw)->set snmp interface vlan 100
C3(rw)->show snmp interface
vlan 100 192.168.10.1
clear snmp interface
UsethiscommandtocleartheinterfaceusedforthesourceIPaddressoftheSNMPagentbackto
thedefaultoftheHostinterface.
Syntax
clear snmp interface
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThiscommandreturnstheinterfaceusedforthesourceIPaddressoftheSNMPagentbacktothe
defaultoftheHostinterface.
C3(rw)->show snmp interface
vlan 100 192.168.10.1
C3(rw)->clear snmp interface
C3(rw)->