Switch User Manual

clear snmp notifyprofile
SecureStack C3 Configuration Guide 8-37
Parameters
Defaults
Ifstoragetypeisnotspecified,nonvolatile(permanent)willbeapplied.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtocreatean SNMPnotifyprofilenamedarea51 and a ssociate atarget
parametersentry.
C3(su)->set snmp notifyprofile area51 targetparam v3ExampleParams
clear snmp notifyprofile
UsethiscommandtodeleteanSNMPnotifyprofileconfiguration.
Syntax
clear snmp notifyprofile profile targetparam targetparam
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodeleteSNMPnotifyprofile“area51”:
C3(su)->clear snmp notifyprofile area51 targetparam v3ExampleParams
Creating a Basic SNMP Trap Configuration
TrapsarenotificationmessagessentbyanSNMPv1orv2agenttoanetworkmanagementstation,
aconsole,oraterminaltoindicatetheoccurrenceofasignificantevent,suchaswhenaportor
devicegoesupordown,whenthereareauthenticationfailures,andwhenpowersupplyerrors
profile
SpecifiesanSNMPfilternotifyname.
targetparam
targetparam
SpecifiesanassociatedentryintheSNMPTargetParamsTable.
volatile|
nonvolatile
(Optional)Specifiesastoragetype.
profile SpecifiesanSNMPfilternotifynametodelete.
targetparam
targetparam
SpecifiesanassociatedentryinthesnmpTargetParamsTable.