Switch User Manual

show newaddrtrap
8-30 SNMP Configuration
show newaddrtrap
Usethiscommandtodisplaytheglobalandport‐specificstatusoftheSNMPnewMACaddresses
trapfunction.
Syntax
show newaddrtrap [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,thestatusofthenewMACaddressestrapfunctionwillbedisplayed
forallports.
Mode
Switchcommand,read‐only.
Usage
Bydefault,thisfunctionisdisabledgloballyandperport.
Example
ThisexampledisplaystheNewAddressTrapstateforGigabitEthernetports1through5in
unit/slot1.
C3(ro)->show newaddrtrap ge.1.1-5
New Address Traps Globally disabled
Port Enable State
--------- ------------
ge.1.1 disabled
ge.1.2 disabled
ge.1.3 disabled
ge.1.4 disabled
ge.1.5 disabled
set newaddrtrap
UsethiscommandtoenableordisableSNMPtrapmessaging,globallyorononeormoreports,
whennewsourceMACaddressesaredetected.
Syntax
set newaddrtrap [port-string] {enable | disable}
port‐string (Optional)DisplaysthestatusofthenewMACaddressestrapfunction
onspecificports.