Switch User Manual

Configuring SNMP Notification Parameters
SecureStack C3 Configuration Guide 8-29
Example
ThisexampleshowshowtoclearSNMPtargetaddressentry“tr”:
C3(su)->clear snmp targetaddr tr
Configuring SNMP Notification Parameters
About SNMP Notify Filters
ProfilesindicatingwhichtargetsshouldnotreceiveSNMPnotificationmessagesarekeptinthe
NotifyFiltertable.Ifthistable isempty,meaningthatnofilteringisassociatedwithanySNMP
target,thennofilteringwilltakeplace.“Traps”or“informs”notificationswillbesenttoall
destinationsintheSNMPtargetAddrTable
thathavetagsmatchingthosefoundinthe
NotifyTable.
WhentheNotifyFiltertablecontainsprofileentries,theSNMPagentwillfindany filterprofile
namethatcorrespondstothetargetparameternamecontainedinanoutgoingnotification
message.Itwillthenapplytheappropriatesubtree‐specificfilterwhengeneratingnotification
messages.
Purpose
ToconfigureSNMPnotificationparametersandoptionalfilters.Notificationsareentitieswhich
handlethegenerationofSNMPv1andv2“traps”orSNMPv3“informs”messagestoselect
managementtargets.Optionalnotificationfiltersidentifywhichtargetsshouldnotreceive
notifications.ForasampleSNMPtrapconfigurationshowinghowSNMPnotificationparameters

areassociatedwith securityandauthorizationcriteria(targetparameters)andmappedtoa
managementtargetaddress,referto“CreatingaBasicSNMPTrapConfiguration ”onpage 8‐37.
Commands
For information about... Refer to page...
show newaddrtrap 8-30
set newaddrtrap 8-30
show snmp notify 8-31
set snmp notify 8-32
clear snmp notify 8-33
show snmp notifyfilter 8-33
set snmp notifyfilter 8-34
clear snmp notifyfilter 8-35
show snmp notifyprofile 8-36
set snmp notifyprofile 8-36
clear snmp notifyprofile 8-37