Switch User Manual

clear port mirroring
7-40 Port Configuration
Example
Thisexampleshowshowtocreateandenableportmirroringwithge.1.4asthesourceport,and
ge.1.11asthetargetport:
C3(su)->set port mirroring create ge.1.4 ge.1.11
clear port mirroring
Usethiscommandtoclearaportmirroringrelationship.
Syntax
clear port mirroring source destination
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearaportmirroring relationshipbetweensourceportge.1.4and
targetportge.1.11:
C3(su)->clear port mirroring ge.1.4 ge.1.11
set mirror vlan
AssignsaVLANtobereservedformirroringtraffic.Ifa mirroredVLANiscreated,allmirrored
trafficwillegressVLANtagged.Alltrafficonthem irrorVLANwillbeflooded.
Syntax
set mirror vlan vlan-id
Parameters
Defaults
None.
source Specifiesthesourceportofthemirroringconfigurationtobecleared.For
adetaileddescriptionofpossibleport‐stringvalues,refer to“PortString
SyntaxUsedintheCLI”onpage7‐1.
destination Specifiesthetargetportofthemirroringconfigurationtobecleared.
vlan‐id SpecifiestheVLANtobeusedforremoteportmirroring.TheIDcan
rangefrom2to4093.