Switch User Manual

set port mdix
SecureStack C3 Configuration Guide 7-21
Defaults
Ifport‐stringisnotentered,allportsontheswitchare configured.
Mode
Switchcommand,read‐write.
Usage
Bydefault,Enterasys Networksswitchdevicesareconfiguredtoautomaticallydetectthecable
typeconnection,straightthrough(MDI)orcross‐over(MDIX),requiredbythecableconnectedto
theport.YoucanconfigureportstoonlyuseMDIorMDIXconnectionswiththiscommand.
ThiscommandonlyconfiguresEthernetports,andcannot
beusedtoconfigurecomboportson
theswitch.
Example
Thisexampleconfiguresportsge.1.1andge.1.2touseMDIXmode.
C3(su)->set port mdix mdix ge.1.1-2
mdi ConfigureportstouseMDImodeonly.
mdix ConfigureportstouseMDIXmodeonly.
port‐string (Optional)Specifytheportorportstoconfigure.