Switch User Manual

clear lldp port tx-tlv
6-36 Discovery Protocol Configuration
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampledisablesthemanagementaddress,MEDcapability,MEDnetworkpolicy,andMED
locationidentificationTLVsfrombeingsentinLLDPDUsbyport
ge.1.1.
C3(rw)->clear lldp port tx-tlv mgmt-addr med-cap med-pol med-loc ge.1.1
med‐pol DisablestheLLDP‐MEDNetworkPolicyTLVfrombeingtransmitted
inLLDPDUs.
med‐loc DisablestheLLDP‐MEDLocationIdentificationTLVfrombeing
transmittedinLLDPDUs.
med‐poe DisablestheLLDP‐MEDExtendedPowerviaMDITLVfrombeing
transmittedinLLDPDUs.OnlyvalidforPoE‐enabledports.
port‐string Specifies
theportorrangeofportstobeaffected.