Switch User Manual

clear lldp port network-policy
6-34 Discovery Protocol Configuration
Example
ThisexamplereturnsthelocationinformationELINvalueonportge.1.1tothedefaultvalueof
null.
C3(rw)->clear lldp port location-info elin ge.1.1
clear lldp port network-policy
UsethiscommandtoreturnLLDPnetworkpolicyforasetofapplicationsonaportorrangeof
portstodefaultvalues.
Syntax
clear lldp port network-policy {all | voice | voice-signaling | guest-voice |
guest-voice-signaling | softphone-voice | video-conferencing | streaming-video |
video-signaling} {[state] [tag] [vid] [cos] [dscp]} port-string
Parameters
Defaults
Atleastoneapplica tion (orall)andonepolicyparametermustbespecified.
Mode
Switchcommand,read‐write.
all Appliescommandtoallapplications.
voice Appliescommandtothevoiceapplication.
voice‐signaling Appliescommandtothevoicesignalingapplication.
guest‐voice Appliescommandtotheguestvoiceapplication.
guest‐voice‐signaling Appliescommandtotheguestvoicesignalingapplication.
softphone‐voice Appliescommandtothesoftphonevoiceapplication.
video‐conferencing Appliescommandtothevideoconferencingapplication.
streaming‐video Appliescommandtothestreamingvideoapplication.
video‐signaling Appliescommandtothevideosignalingapplication.
state (Optional)Clearsthestateofadvertisingtheapplication
informationbeingconfiguredtodisabled.
tag (Optional)Clearsthetagvalueoftheapplicationbeingconfigured
tountagged.
vid (Optional)ClearstheVLANidentifierfortheporttothedefault
valueof1.
cos (Optional)ClearstheLayer2prioritytobeusedfortheapplication
beingconfiguredtothedefaultvalueof0.(Avalueof0represents
useofthedefaultpriorityasdefinedinIEEE802.1D.)
dscp
 (Optional)ClearstheDSCPvaluetobeusedtoprovideDiffserv
nodebehaviorfortheapplicationbeingconfiguredtothedefault
valueof0.(Avalueof0representsuseofthedefaultDSCPvalue
asdefinedinRFC2475.)
port‐string Specifiestheportorrangeofportstobe
affected.