Switch User Manual

clear lldp port status
6-32 Discovery Protocol Configuration
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexamplereturnsthetransmitintervaltothedefaultvalueof30seconds.
C3(rw)->clear lldp tx-interval
clear lldp port status
Usethiscommandtoreturntheportstatustothedefaultvalueofboth(bothtransmittingand
processingreceivedLLDPDUsareenabled).
Syntax
clear lldp port status port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexamplereturnsportge.1.1tothedefaultstateofenab ledforbothtransmittingand
processingreceivedLLDPDUs.
C3(rw)->clear lldp port status ge.1.1
clear lldp port trap
UsethiscommandtoreturntheportLLDPtrapsettingtothedefaultvalueofdisabled.
Syntax
clear lldp port trap port-string
Parameters
Defaults
None.
port‐stringSpecifiestheportorrangeofportstobeaffected.
port‐string Specifiestheportorrangeofportstobeaffected.