Switch User Manual

set lldp port tx-tlv
SecureStack C3 Configuration Guide 6-29
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleconfiguresthemanagementaddress,MEDcapability,MEDnetworkpolicy,and
MEDlocationidentificationTLVstobesentinLLDPDUsbyport
ge.1.1.
C3(rw)->set lldp port tx-tlv mgmt-addr med-cap med-pol med-loc ge.1.1
gvrp GVRPinformationdefinedbyProtocolIdentityIEEE802.1
ExtensionsTLV.IfLACPisenabledontheport,valuesentincludes
versionofprotocolbeingused.
mac‐phy MAC‐PHYConfiguration/StatusIEEE802.3ExtensionsTLV.Value
sentincludestheoperationalMAUtype,duplex,andspeedofthe
port.
poe PowerviaMDIIEEE
802.3ExtensionsTLV.Valuessentinclude
whetherpairselectioncanbecontrolledonport,andthepowerclass
suppliedbytheport.Onlyvalidfor PoE‐enabled ports.
link‐aggr LinkAggregationIEEE802.3ExtensionsTLV.Valuessentindicate
whetherthelinkassociatedwiththisportcanbeaggregated,
whetheritis
currentlyaggregated,andifaggregated,theaggregated
portidentifier.
max‐frame MaximumFrameSizeIEEE802.3ExtensionsTLV.Valuesent
indicatesmaximumframesizeoftheport’sMAC andPHY.
med‐cap LLDP‐MEDCapabilitiesTLV.Valuesentindicatesthecapabilities
(whetherthedevicesupportslocationinformation,networkpolicy,
extendedpowerviaMDI)
andDeviceType(networkconnectivity
device)ofthesendingdevice.
med‐pol LLDP‐MEDNetworkPolicyTLV.Valuessentincludeapplication
name,VLANtype(taggedoruntagged),VLANID,andbothLayer2
andLayer3prioritiesassociatedwithapplication,forallapplications
enabledontheport.Seethesetlldpport
network‐policycommand
formoreinformation.
med‐loc LLDP‐MEDLocationIdentificationTLV.ValuesentistheECSELIN
valueconfiguredontheport.Seethesetlldpportlocation‐info
commandformoreinformation.
med‐poe LLDP‐MEDExtendedPowerviaMDITLV.Valuessentincludethe
PowerLimit(totalpower
theportiscapableofsourcingovera
maximumlengthcable)andthepowerpriorityconfiguredonthe
port.OnlyvalidforPoE‐enabledports.
port‐string Specifiestheportorrangeofportstobeaffected.