Switch User Manual
show lldp port remote-info
SecureStack C3 Configuration Guide 6-21
show lldp port remote-info
Usethiscommand todisplaytheremotesysteminformationstoredforaremotedeviceconnected
toalocalport.Youcanusethisinformationtodetectmisconfigurationsorincompatibilities
betweenthelocalportandtheattachedendpointdevice(remoteport).
Syntax
show lldp port remote-info [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,remotesysteminformationwillbedisplayedforallports.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaytheremotesysteminformationstoredforportge.3.1.The
remotesysteminformationwasreceivedfromanIPphone,whichisanLLDP‐MED‐enabled
device.Table 6‐5describestheoutputfieldsthatareuniquetotheremotesysteminformation
displayedforaMED‐enableddevice.
C3(ro)->show lldp port remote-info ge.3.1
Local Port : ge.3.1 Remote Port Id : 00-09-6e-0e-14-3d
---------------------
Mgmt Addr : 0.0.0.0
Chassis ID : 0.0.0.0
Device Type : Communication Device Endpoint (class III)
Sys Name : AVE0E143D
Sys Cap Supported/Enabled : bridge,telephone/bridge
Auto-Neg Supported/Enabled : yes/yes
Auto-Neg Advertised : 10BASE-T, 10BASE-TFD
: 100BASE-TX, 100BASE-TXFD
: pause, Spause
Operational Speed/Duplex/Type : 100/full/TX
Network Policy
(app/tag/vlanId/cos/dscp) : voice/untagged/0/6/46
PoE Power Limit (mW) LLDP-MED Extensions Extended Power via MDI TLV. Displayed only
when a port has PoE capabilities. Indicates the total power the port is
capable of sourcing over a maximum length cable, based on its current
configuration, in milli-Watts.
PoE Power Priority LLDP-MED Extensions Extended Power via MDI TLV. Displayed only
when a port has PoE capabilities. Indicates the power priority configured
on the port. Value can be critical, high, or low.
Table 6-4 show lldp port local-info Output Details (Continued)
Output Field What it Displays...
port‐string (Optional)Displaysremotesysteminformationforoneorarangeof
ports.