Switch User Manual

Configuring Link Layer Discovery Protocol and LLDP-MED
6-14 Discovery Protocol Configuration
Commands
ThecommandsusedtoreviewandconfiguretheCDPdiscoveryprotocolarelistedbelow.
Configuration Tasks
Thecommandsincludedinthisimplementationallowyoutoperformthefollowingconfiguration
tasks:
For information about... Refer to page...
show lldp 6-15
show lldp port status 6-16
show lldp port trap 6-16
show lldp port tx-tlv 6-17
show lldp port location-info 6-17
show lldp port local-info 6-18
show lldp port remote-info 6-21
show lldp port network-policy 6-22
set lldp tx-interval 6-23
set lldp hold-multiplier 6-24
set lldp trap-interval 6-24
set lldp med-fast-repeat 6-25
set lldp port status 6-26
set lldp port trap 6-26
set lldp port med-trap 6-27
set lldp port location-info 6-27
set lldp port tx-tlv 6-28
set lldp port network-policy 6-30
clear lldp 6-31
clear lldp port status 6-32
clear lldp port trap 6-32
clear lldp port med-trap 6-33
clear lldp port location-info 6-33
clear lldp port network-policy 6-34
clear lldp port tx-tlv 6-35