Switch User Manual

clear system hostprotect
3-58 Basic Configuration
Usage
Changingthehostprotectstatusrequiresaresetoftheswitchorstackofswitches.Ifmorethan
twopriorityqueuemappingsexistandyouexecutethiscommandtoresetthehostprotectstatus
toenabled,thecommandwillnotcompleteandyouwillgetawarningmessage.
Example
Thisexampleattemptstoreturnthehostprotectstatustothedefault,butthecommandcannot
completebecausemorethantwopriorityqueuemappingsexist.
C3(rw)->clear system hostprotect
Changes in the host protect mode will require resetting this stack.
Are you sure you want to continue? (y/n)y
Error: Could not set system host protect to default