Switch User Manual

save config
SecureStack C3 Configuration Guide 3-41
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtosettheconfigurationpersistencemodetomanual:
C3(su)->set snmp persistmode manual
save config
Usethiscommandtosavetherunningconfiguration.Ifapplicable,thiscommandwillsavethe
configurationtoallswitchmembersinastack.
Syntax
save config
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtosavetherunningconfiguration:
C3(su)->save config
dir
Usethiscommandtolistconfigurationand imagefilesstoredinthefilesystem.
Syntax
dir [filename]
auto Setstheconfigurationpersistencemodetoautomatic.Thisisthedefault
state.
manual Setstheconfigurationpersistencemodetomanual.Inordertomake
configurationchangespersistent,the saveconfigcommandmustbe
issuedasdescribedin“saveconfig”onpage3‐41.Thismodeisusefulfor
revertingback
tooldconfigurations.