User manual

Connecting Cables
2-12 Hardware Installation
6. Attach the dual power supply cords to the connectors at the rear of the XSR, as shown in
Figure 2-19, and plug in the country-specific power cords to a wall socket. The XSR will power
up.
Figure 2-19 Connecting Dual Internal Power Supply Cords
You are now ready to configure the software and initialize the XSR. Continue with “Software
Configuration” on page 3-1.
LINE
100~125V~1.25A
200~240V~0.65
A
50/60Hz
LINE
100~125V~1.25A
200~240V~0.65A
50/60Hz