Network Card User Manual

182 RiverMaster Administrator’s Guide
Report Contents Chapter 8
Generating Reports
Client Anomaly Report
This report lists Aurorean Client Software connection problems such as
authentication failures and other failed tunnel attempts. These events are
sorted by the remote client’s user name and then listed according to the time
they were sent.
Table 15 lists the column headings and values that appear in a Client
Anomaly Report. A text area under each message also provides a detailed
description of the cause of the condition.
Figure 95 displays a typical Client Anomaly Report.
Table 15 Client Anomaly Report Values
Heading Explanation
TIMESENT The time the event occurred (according to the remote client PC’s
clock) in
Hour:Minute:Second military format.
MSGTYPE Category of the anomaly message; possible values are:
Alarms for Aurorean Client Software alarm conditions.
Alerts for alert conditions that may lead to an alarm state.
Problem for problem notification messages.
MSGID An ID number useful for Enterasys Networks Customer Support
personnel to isolate the problem.
HOSTNAME The computer name assigned to the remote client’s computer.
DOMAIN The APS Domain name given this Aurorean Virtual Network.
BUILDREV Version of Aurorean Client Software installed and running on the
remote client in the format:
Release# Build#
where Release# indicates the functionality release (e.g. 3.0) and
Build# indicates an internal software version number.
S/W
COMPONENT
Software component that reported the anomaly. Possible values
include:
Authorize
Aurorean Client