Network Card User Manual

RiverMaster Administrator’s Guide 133
Chapter 6 Creating a New Group
Managing Users & Groups
Figure 71 Tunnel Policies
Table 8 Tunnel Policies
Policy Explanation
Allow IPX When enabled, Aurorean Client negotiates IPX protocol with the ANG and
the user can access Novell NetWare servers on the network. This policy is
disabled by default.
Allow
Firewall
Traversal
When enabled, Aurorean Client traverses firewalls or NAT servers to
successfully connect with the ANG. This policy is disabled by default.
Firewall/NAT traversal employs the HyperText Transfer Protocol - Secure
(HTTPS) to encapsulate the selected tunneling protocol (IPSec or PPTP) and
thereby prevent a firewall or NAT server from blocking Aurorean Client’s
return connection to the computer where the application resides.
Tunnel
Protocol
Determines which tunneling protocol, Point-to-Point Tunneling Protocol
(PPTP) or Internet Protocol Security (IPSec), is used on all tunnels started by
users in this group. The default tunneling protocol is PPTP.