Switch Configuration Guide

Logging And Network Management Command Set
Configuring System Logging
Matrix NSA Series Configuration Guide 11-19
11.2.1.10 clear logging application
Use this command to reset the logging severity level for one or all applications to the default value
of 6 (notifications of significant conditions).
clear logging application {mnemonic | all}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the logging severity level for SSH:
mnemonic | all (Optional) Resets the severity level for a specific
application or for all applications. Valid mnemonic values
and their corresponding applications are listed in
Table 11-3.
Matrix(rw)->clear logging application SSH