Switch Configuration Guide

Port Configuration Command Set
Disabling / Enabling and Naming Ports
Matrix NSA Series Configuration Guide 4-39
4.3.3.6 set forcelinkdown
Use this command to enable or disable the force link down function. When enabled, this forces ports
in the “operstatus down” state to become disabled.
set forcelinkdown {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable the force link down function:
enable | disable Enables or disables the force link down function on all
ports.
Matrix(rw)->set forcelinkdown enable