Switch Configuration Guide

Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
Matrix NSA Series Configuration Guide 3-27
• show lldp port local-info (Section 3.2.4.6)
• show lldp port remote-info (Section 3.2.4.7)
• show lldp port network-policy (Section 3.2.4.8)
• set lldp tx-interval (Section 3.2.4.9)
• set lldp hold-multiplier (Section 3.2.4.10)
• set lldp trap-interval (Section 3.2.4.11)
• set lldp med-fast-repeat (Section 3.2.4.12)
• set lldp port status (Section 3.2.4.13)
• set lldp port trap (Section 3.2.4.14)
• set lldp port med-trap (Section 3.2.4.15)
• set lldp port location-info (Section 3.2.4.16)
• set lldp port tx-tlv (Section 3.2.4.17)
• set lldp port network-policy (Section 3.2.4.18)
• clear lldp (Section 3.2.4.19)
• clear lldp port status (Section 3.2.4.20)
• clear lldp port trap (Section 3.2.4.21)
• clear lldp port med-trap (Section 3.2.4.22)
• clear lldp port location-info (Section 3.2.4.23)
• clear lldp port network-policy (Section 3.2.4.24)
• clear lldp port tx-tlv (Section 3.2.4.25)