Switch Configuration Guide
General Configuration Command Set
Resetting the Device
Matrix NSA Series Configuration Guide 2-127
2.2.11 Resetting the Device
Purpose
To reset one or more device modules, to clear the user-defined switch and router configuration
parameters, or to schedule a system reset in order to load a new boot image.
Commands
The commands used to reset the device and clear the configuration are listed below and described
in the associated sections as shown.
• show reset (Section 2.2.11.1)
• reset (Section 2.2.11.2)
• reset at (Section 2.2.11.3)
• reset in (Section 2.2.11.4)
• clear config (Section 2.2.11.5)