Switch Configuration Guide

Security Configuration Command Set
Configuring Convergence End Points (CEP) Phone Detection
14-102 Matrix NSA Series Configuration Guide
• show cep connections (Section 14.3.8.1)
• show cep detection (Section 14.3.8.2)
• show cep policy (Section 14.3.8.3)
• show cep port (Section 14.3.8.4)
• set cep (Section 14.3.8.5)
• set cep port (Section 14.3.8.6)
• set cep policy (Section 14.3.8.7)
• set cep detection (Section 14.3.8.8)
• set cep detection type (Section 14.3.8.9)
• set cep detection address (Section 14.3.8.10)
• set cep detection protocol (Section 14.3.8.11)
• set cep detection porthigh | portlow (Section 14.3.8.12)
• set cep initialize (Section 14.3.8.13)
• clear cep (Section 14.3.8.14)