Switch Configuration Guide

Security Configuration Command Set
Configuring TACACS+
14-28 Matrix NSA Series Configuration Guide
14.3.4.3 show tacacs server
Use this command to display the current TACACS+ server configuration.
show tacacs server {index | all}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example displays configuration information for all configured TACACS+ servers.
index Display the configuration of the TACACS+ server
identified by index. The value of index can range from 1 to
2,147,483,647.
all Display the configuration for all configured TACACS+
servers.
Matrix(ro)->show tacacs server all
TACACS+ Server IP Address Port Timeout Status
-------------- --------------- ----- ------- -------
1 192.168.10.10 49 10 Active
2 192.168.1.116 49 10 Active