Switch Configuration Guide

Security Configuration Command Set
Configuring TACACS+
14-24 Matrix NSA Series Configuration Guide
14.3.4 Configuring TACACS+
Purpose
To perform the following:
Review the TACACS+ client and server configurations on the device.
Enable or disable the TACACS+ client.
Set local and remote login options.
Set server parameters, including IP address, timeout period, server port, and secret.
Reset TACACS+ client and server settings to default values.
Commands
The commands used to review and configure TACACS+ are listed below and described in the
associated section as shown:
show tacacs (Section 14.3.4.1)
set tacacs (Section 14.3.4.2)
show tacacs server (Section 14.3.4.3)
set tacacs server (Section 14.3.4.4)
clear tacacs server (Section 14.3.4.5)
show tacacs session (Section 14.3.4.6)
set tacacs session (Section 14.3.4.7)
clear tacacs session (Section 14.3.4.8)
show tacacs command (Section 14.3.4.9)
set tacacs command (Section 14.3.4.10)
show tacacs singleconnect (Section 14.3.4.11)
set tacacs singleconnect (Section 14.3.4.12)