- Cabletron Fast Network 10 USER GUIDE

Using LCM to Check FN10 Status
Fast Network 10 User Guide Page 4-11
4.3.2 Displaying MAC Addresses
The addresses display command displays all MAC addresses in the
FN10 Bridge Address Table. The display includes:
• The MAC address
• Type of address, including:
- Dynamic (learned)
- Ethernet port (for the MAC address of an Ethernet port)
- Static (for an address that was added by an NMS)
- BPDU (the MAC address to which all BPDUs are directed)
- Reserved (the address reserved by 802.1d, but not yet assigned)
- All LANs (the addresses reserved by 802.1d for network
management)
• Port number
• Age (in seconds since a packet was last received from that address)
• Number of packets received from that address
• Number of packets forwarded to that address
The display automatically pauses with each screen of information.
Addresses are displayed in random order; for example, address
02:00:00:00:00:00 may appear after address 04:00:00:00:00:00.
The age will be the most recent of the following:
• Time since a packet was last received from that address
• Time since that address was created (e.g., a static address created by
an NMS)