- Enterasys Gigabit and Fast Ethernet Switches Hardware Installation Guide
Table Of Contents
- Enterasys® SecureStack™ B2 Gigabit and Fast Ethernet Switches Hardware Installation Guide
- Notice
- Regulatory Compliance Information
- Federal Communications Commission (FCC) Notice
- Clase A. Aviso de ITE
- Klasse A ITE Anmerkung
- Seguridad del Producto
- Produktsicherheit
- Electromagnetic Compatibility (EMC)
- Compatibilidad Electromágnetica (EMC)
- Elektro- magnetische Kompatibilität ( EMC )
- VCCI Notice
- BSMI EMC Statement - Taiwan
- Safety Information Class 1 Laser Transceivers
- Enterasys Networks, Inc. Firmware License Agreement
- Regulatory Compliance Information
- Notice
- Contents
- About This Guide
- Introduction
- Network Requirements
- Hardware Installation
- Considerations Prior to Installation
- Required Tools
- Unpacking the Switch
- Installing Optional Mini-GBICs
- Installing the Switch on a Flat Surface
- Rack Mounting the Switch
- Connecting High-Speed Stacking Cables
- Configuring Switches in a Stack
- Connecting AC and RPS-SYS Power
- Connecting to Console Port for Local Management
- Connecting to the Network
- Completing the Installation
- Troubleshooting
- Specifications
- Index
Switch Specifications
Enterasys SecureStack B2 Installation Guide A-3
Predicted hours for Mean
Time Between Failures
(MTBF)
For the MTBF hours for these products, refer to the MTBF web
site at URL http://www.enterasys.com/support/mtbf/
Heat Dissipation (maximum)
B2G124-24
B2G124-48
B2H124-48
@ 86.40 W, 294.80 Btu/hr
@ 129.50 W,
441.87 Btu/hr
@ 65.50 W, 205.80 Btu/hr
AC Input Specifications
Input Voltage 100 to 240 VAC
Input Current
B2G124-24
B2G124-48
B2H124-48
0.8 A Max
1.4 A Max
0.8 A Max
Frequency 50 to 60 Hz
Environmental
Operating Temperature 5°C to 40°C (41°F to 104°F)
Storage Temperature -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity 5% to 90% (non-condensing)
Table A-1 Switch Specifications (continued)
Item Specification