User's Manual

OMPLIANCES

XIII

Operating Frequencies

The user must use the configuration utility provided with this product to ensure the

channels of operation are in conformance with the spectrum usage rules for

country in which it is being operated.

Industry Canada - Class B

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus as set out in the interference-causing equipment

standard entitled “Digital Apparatus,” ICES-003 of Industry Canada.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables

aux appareils numériques de Classe B prescrites dans la norme sur le matérial

brouilleur: “Appareils Numériques,” NMB-003 édictée par l’Industrie.

RBT-1002C-EU

Australia / New Zealand AS/NZS 4771

EC Conformance Declaration

Marking by the above symbol indicates compliance with the Essential

Requirements of the R&TTE Directive of the European Union (1999/5/EC). This

equipment meets the following conformance standards:

• EN 60950 (IEC 60950) - Product Safety

• EN 301 893 - Technical requirements for 5 GHz radio equipment

• EN 300 328 - Technical requirements for 2.4 GHz radio equipment

• EN 301 489-1 / EN 301 489-17 - EMC requirements for radio equipment

Countries of Operation & Conditions of Use in the European

Community

This device is intended to be operated in all countries of the European

Community. Requirements for indoor vs. outdoor operation, license requirements

and allowed channels of operation apply in some countries as described below:

Note:

The user must use the configuration utility provided with this product to

ensure the channels of operation are in conformance with the spectrum

usage rules for European Community countries as described below.

• This device requires that the user or installer properly enter the current country

of operation in the command line interface as described in the user guide, before

operating this device.

• This device will automatically limit the allowable channels determined by the cur-

rent country of operation. Incorrectly entering the country of operation may result

in illegal operation and may cause harmful interference to other system. The

user is obligated to ensure the device is operating according to the channel lim-

itations, indoor/outdoor restrictions and license requirements for each European

Community country as described in this document.