Network Router User's Manual

1-Gigabit Ethernet Transceiver Specifications (SFP)
Matrix X16-C Chassis Installation Guide A-5
ThefollowingXFPspecificationsinTable A‐9meetorexceedtheIEEE802.3ae‐2002standard.
1-Gigabit Ethernet Transceiver Specifications (SFP)
ThefollowingSmallFormFactorPluggable(SFP)opticaltransceiversaresupportedontheMatrix
X16‐C.Specificationsforthefollowingmodulesaredescribedbelow.
•MGBIC‐LC01
•MGBIC‐LC03
•MGBIC‐LC09
•MGBIC‐MT01
•MGBIC‐08
•MGBIC‐02
Table A-9 Recommended Cable Types and Specifications
Item Type Max. Reach
Min. Reach
1
1. The limiting factor is saturation of the receiver by the transmitter. When presented with a signal at a strength
above the saturation point, the receiver cannot distinguish between pulses, though no hardware damage
occurs.
Connector
10GBASE-LR-XFP SMF (Single Mode Fiber) 10 km (6.21 mi) 2 m (6.6 ft) LC
10GBASE-ER-XFP SMF (Single Mode Fiber) 40 km (24.85 mi)
2
2. Links longer than 30 km for the same link power budget are considered engineered links. Attenuation for such
links needs to be less than the minimum
2 m (6.6 ft) with
minimum of 5 dB
attenuation
LC
10GBASE-ZR-XFP SMF (Single Mode Fiber) 80 km (49.7 mi) 2 m (6.6 ft) with
minimum of 11 dB
attenuation
LC
10GBASE-SR-XFP MMF (Multimode Fiber) 300 m (984 ft) 2 m (6.6 ft) LC