Network Router User's Manual

Optional Cable Management Kit
Matrix X16-C Chassis Installation Guide 3-39
Figure 3-33 Installing the Bottom Cable Management Assembly
4. Removethebarofthecable managementassemblybylooseningthetwocaptivescrewsonthe
bar.See Figure 3‐34onpage 3‐40.
5. GathertheIOMcablesyouwishtobundleandwraptheminthevelcrocablestraps.Control
Modulecablesmayalsobesecuredinthismanner.See
Figure 3‐34onpage 3‐40.
6. Reattachthebartothecablemanagementassembly,asapplicable,bytighteningthetwo
captivescrewsonthebar.
1 Bottom chassis bezel
2 Captive screws (2) (on chassis bezel)
3 Bottom cable management assembly
4 Captive screws (2) (on cable management assembly base panel)
5 Cables
Note: Removing the bar from the cable management assembly is optional. You can thread the
cables through the opening between the bottom panel and the bar, if you desire.
1234 5678
321
X16