Network Router User's Manual

Attaching Cables, Installing Compact Flash Card and DIMM Upgrade Kit
3-36 Matrix X16-C Chassis Setup
4. PushtheconnectorarmsawayfromthefirstDIMM,asshowninFigure 3 ‐32 ,and removethe
DIMM.
Figure 3-32 Removing the Existing DIMM
5. Repeatstep4toremovethesecondDIMM.
Installing the DIMMs
ToinstalltheDIMMs,proceedasfollows:
1. Makesureconnectorarmsarepushedout.
2. InsertthefirstDIMMdownbetweentheconnectorfingers.
3. PushdownontheDIMMandpushinontheconnectorarmsunt il thearmslockintothetop
notch.
4. Repeatsteps1through3toinstallthesecondDIMM.
1 DIMM 2 Connector fingers 3 Connector arms
Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive
electronic equipment.
Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones de
seguridad para evitar descargas de electricidad estática.