Network Router User's Manual

Installing and Removing a Fan Tray
Matrix X16-C Chassis Installation Guide 3-19
Figure 3-17 Removing Bottom Bezel
6. Slowlyslidethefantrayintotheopenslotatthebottomofthechassis,asshownin
Figure 3‐18,untilitengageswiththeconnectoronthebackplane.
Figure 3-18 Installing Fan Tray
7. Replacethebottombezelbyliftingitontothefantrayflangesandre‐attachingthecaptive
screws.
1 Fan tray slot 1 3 Captive screws (2)
2 Bottom bezel 4 Fan tray flanges (2)
1 Fan tray slot 1 2 Fan tray
Note: If you are replacing the top bezel, note that the fan tray flanges face up, so in re-attaching the
bezel, pull it down over the flanges.
123 67 845
FAN TRAY
2
FAN TRAY
3
1
STRAP
S/N: MAC ADD.
CM1 CM2
GROUND
FAN TRAY
1
3 3
2
4
STRAP
S/N: MAC ADD.
CM1 CM2
GROUND
ALLOW FAN BLADES
TO STOP PRIOR TO
FAN TRAY REMOVAL
STATUS
2
1