Switch Configuration Guide

Setting Auto-Negotiation and Advertised Ability clear port advertise
4-36 Port Configuration
Defaults
Ifnotspecified,allmodesofadvertisedabilitywillbecleared.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoresetalladvertisedabilitytodefaultsettingsonfe.3.4:
Matrix(rw)->clear port advertise fe.3.4
100tx (Optional)Clears100BASE‐TXhalfduplexmodefromtheport’s
advertisedability.
100txfd (Optional)Clears100BASE‐TXfullduplexmodefromtheport’s
advertisedability.
1000x (Optional)Clears1000BASE‐X,‐LX,‐SX,‐CXhalfduplexmodefrom
theport’sadvertisedability.
1000xfd (Optional)Clears1000BASE‐X,‐LX,‐SX, ‐CXfullduplexmodefrom
the
port’sadvertisedability.
1000t (Optional)Clears1000BASE‐Thalfduplexmodefromtheport’s
advertisedability.
1000tfd (Optional)Clears1000BASE‐Tfullduplexmodefromtheport’s
advertisedability.
pause (Optional)ClearsPAUSEforfull‐duplexlinksfromtheport’s
advertisedability.
apause (Optional)ClearsasymmetricPAUSEforfull‐duplexlinksfrom
the
port’sadvertisedability.
spause (Optional)ClearssymmetricPAUSEforfull‐duplexlinksfromthe
port’sadvertisedability.
bpause (Optional)ClearsasymmetricandsymmetricPAUSEforfull‐duplex
linksfromtheport’sadvertisedability.